Futaba SBC-1 S.Bus Channel Programmer

Description

Used for setting channels to S.Bus servos and decoders of the Futaba
S.Bus system
LED blinks and then glows steadily when channel setting is complete
One year limited warranty through manufacturer beginning at date of
purchase

Futaba SBC-1 S.Bus Channel Setting Tool with Screwdriver and
instructions

Connecting battery to battery port and following instructions

Dimensions: 1.54 x 1.02 x 0.39″ (39 x 26 x 10mm)
Weight: 0.28oz (7.8g)
Power Requirement: 4 – 5 cell NiCd, NiMH
Operating Temperature Range: -10° to 45° C

Do not connect anything other than a Futaba S.Bus servo or S.Bus
decoder to the Channel Setting Tool. If a conventional servo is
connected, the servo may operate erroneously.